2020. 2. 29. 15:16ㆍ카테고리 없음
. Minimally intrusive.
Hex V2 Review
Free tool. No license cost, no hidden fees. SystemView PRO: Unlimited recording. RTOS task, resource, and API tracing. Interrupt tracing for bare metal systems without an RTOS.
Continuous real-time recording and live analysis with J-Link and SEGGER RTT technology. Live analysis of captured data - view responses to stimuli in real time without stopping the target. embOS, emNet, and FreeRTOS API call tracing as standard. Can be adapted to other RTOS using a fully documented API. Works on any CPU. Real-time Streaming Trace (trace data is streamed to PC in real time, unlimited trace buffer). SuperSpeed USB 3.0 and GigaBit Ethernet Interfaces for Highest Bandwidth.
Up to 150 MHz ETM Trace Clock (works with all currently supported devices). Supports Tracing on Cortex-M0+/M1/M23/M3/M33/M4/M7 Targets. Supports Tracing on Cortex-A5/A7/A8/A9/A12/A15/A17 Targets.
Supports Tracing on Cortex-R4/R5/R8 Targets. Full J-Link Functionality. Easy to use with Ozone and Embedded Studio. Cross-platform Support (Windows, Linux, Mac). Free Software Updates. NXP Kinetis K66 MCU (MK66FN2M0VMD18) 180MHz, ARM Cortex-M4.
1.8' LCD module (resolution 160x128). On-board debug probe (K22FN128, mini A/B-type connector); SWD/SWO only, no VCOM port support. External debug interface (19-pin Cortex-M); incl.
Hex Comparison V2.0 Cracked-arn 3
NXP LPC54605 MCU (LPC54605J512) 180MHz, ARM Cortex-M4. External debug interface (9-pin Cortex-M). 1x USB host: full-speed, providing USB supply to device, A type receptacle (for directly plugging in A type devices/modules).
1x USB host: high-speed, providing USB supply to device, A type receptacle (for directly plugging in A type devices/modules). LEDs: 6x (2 status, 4 user LEDs).
1x USB micro B USB 2.0 receptacle for power only. Configuration free: no shorting links or solder jumpers required. Dimensions 32mm x 32mm. Stand-alone flash programming solution. Flasher is a programming tool for all common devices with internal or external flash memory.
For a list of all supported devices click. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone.
Flasher can also operate as a normal J-Link. Complete production grade flash programming solution.
J-Flash is a Windows application, which can program internal and external flash on ARM/Cortex devices. J-Flash can be used as a GUI-based application or in batch mode. J-Link Commander is a free command line utility for simple analysis of the target system with J-Link. The flash download performance with J-Link has been tested with various devices. These tests were performed with J-Link Commander by placing an image of the full flash size of the device into the flash memory of the device.Note: All results are taken from the J-Link Commander output. Precondition: flash was empty or erased, as the flash erase times depend very much on the selected device. As well sector sizes may grow for large devices.
Please refer to the chip manual of the appropriate device to get information about erase times.Device seriesProg. Speed KB/sTotal time. to programa 512 KB image sAmbiq APOLLO (e.g. APOLLO512)104 KB/s5.013 sAnalog Device ADSP-CM4xx (e.g. ADSP-CM403F)153 KB/s4.131 sAnalog Device ADuCM (e.g. ADuCM320)147 KB/s3.731 sAtmel AT91SAM4 (e.g. AT91SAM4S32AMB)301 KB/s2.031 sAtmel SAMD20 (e.g.
ATSAMD20J18)67 KB/s8.667 sAtmel SAM V70/V71 (e.g. ATSAMV7EA)172 KB/s3.109 sSiLabs EFM32 Giant Gecko (e.g. EFM32GG990F1024)255 KB/s2.183 sInfineon XMC4500 (e.g. XMC4500-1024)53 KB/s9.756 sMarvell 88MC200175 KB/s4.388 sNXP Kinetis K60 (e.g. MK60FN1M0xxx12)68 KB/s7.599 sNXP Kinetis L25 (e.g. KL25Z128VLK4)36 KB/s15.766 sNXP Kinetis M34 (e.g. KM34Z128CLL5)24 KB/s21.288 sNXP LPC18xx (e.g.
LPC1857)265 KB/s2.108 sRenesas Synergy S7 (e.g. R7FS7G2)531 KB/s1.065 sRenesas Synergy S3 (e.g.
R7FS3A7)63 KB/s8.220 sST STM32F1/F3 (e.g. STM32F103ZG)33 KB/s15.712 sST STM32F2/F4 (e.g. STM32F407IE)281 KB/s1.901 sST STM32L4 (e.g.
STM32L476ZG)71 KB/s7.912 sST STM32F7 (e.g. STM32F779NI)273 KB/s1.939 sST STM32L0 (e.g. STM32L073VZ)17 KB/s29.952 sTI CC1350 (e.g. CC1350F128)186 KB/s2.792 sTI CC2640 (e.g.
CC2640R2F)187 KB/s2.791 sTI CC2650 (e.g. CC2650F128)186 KB/s2.797 sTI MSP432 (e.g. MSP432P401R)557 KB/s1.040 sToshiba TMPM330 (e.g.
TMPM330FDFG)296 KB/s1.961 s. Includes every operation from start to finish, including the time for program, verify, compare, as well as prepare, target setup and target restore. Since these flash devices are not connected to the address and data bus directly and the connection to the CPU / MCU / MPU differs from device to device, a customized flash algorithm is necessary in order to program these flash devices. The flash algorithm is implemented using Open Flash loader.
This can either be done by the customer or by SEGGER (request quote: ). With custom algorithms it is possible to program these types of flash devices via and Flasher ARM. To program SPI flash memories directly via the SPI bus, there is. In general, the J-Link DLL comes with a built-in device database that defines which devices are supported. SEGGER tries to update this database as often as possible. Still there are occasions, where support for a device is needed, that is not available yet. In such cases the Open Flashloader feature allows to add support to the J-Link. The device will be supported in similar fashion as all the devices supported already.
This includes flash download as well as the unlimited flash breakpoint feature. In addition to creating support for the device, an existing CMSIS compatible flash algorithm can be used to create support for the J-Link as well.For detailed instructions, please refer to our Wiki.
The speed tests have been made with different debug probes and software under the same test conditions. SEGGER J-Link, IAR I-jet and ST-Link V2 and Keil's ULINKpro were tested. J-Link is the only probe which has been tested in different environments such as with IAR Embedded Workbench for ARM, KEIL uVision and SEGGER's J-Link commander. The tests with J-Link were performed with J-Link software version 4.59a and using J-Link flash loader.All tests have been performed by placing a 512 KB program into the flash memory of a blank STM32F417IG microcontroller connected via SWD interface. The SWD speed has been selected at the maximum possible for each debug probe.Tests via JTAG interface gave similar results. Project files are available upon request so to reproduce these tests results.
I-jetThe I-jet, which is limited only for use with the IAR Embedded Workbench for ARM, pales in comparison to the J-Link's flash programming speed. As can be seen, it is six times slower than the SEGGER J-Link. With the option to further software enhance the J-Link with the production flash programming utility (J-Flash) and the ability to take full advantage of your development environment with the Unlimited Flash Breakpoint module (freeing your development from the hardware breakpoint restriction), makes the J-Link the clear winner. ULINKproThe ULINKpro is limited to use with KEIL uVision.
It comes at a much higher price than the industry standard J-Link, and lacks in performance and additional debugging features that are commonplace with the SEGGER product line. Unlike J-Link, it is not capable of setting an unlimited number of flash breakpoints. Since it requires a license of KEIL uVision it is not suitable for flash programming in a production environment.
ST-LINKThe ST-LINK, which is limited only for use with STM8 and STM32 microcontroller families, is cheaply available. This device performs lowest among those tested. The consequences of this include a great increase in development time and debugging frustrations. The inability to move to another ARM/Cortex core may make this device more costly, as projects may become active which ultimately require the purchase of a debug probe that can support a newly chosen microcontroller.